✏ PRINT THIS PAGE

HEADSET PROGRAMMING

Programming Head Coach Headset Only

BEGIN WITH ALL HEADSETS OFF.

  1. Press power button on OFFENSE “MAIN” to turn on headset, (LED flashes green).
  2. Quickly press volume down 3 times, then press and HOLD volume up button.  LED will flash green/red.  The main is now in “program mode”.
  3. Power on “Remote” headset(s) to be programmed, (LED flashes green).
  4. Quickly press volume down 3 times, then press and HOLD volume up button.  LED will flash green/red, then quickly flash green.    The LED will then go to solid RED.  The headset is now programmed. 
  5. Once the remote headset has been programmed, press the power switch to turn off the headset and complete the programming process.

    **FOR HEAD COACH HEADSET, REPEAT ENTIRE PROCESS ON THE DEFENSE “MAIN”.

Clearing the Main Headset

MAIN HEADSET IS STILL ON.

  1. With all system equipment off, press power button on “MAIN” to turn on headset.  (LED flashes green)
  2. Quickly press volume down 3 times, then press and HOLD volume up button.  LED will flash green/red.  The main is now in “program mode”.
  3. Press and hold the volume down button for 3 seconds until red LED flashes quickly.  This “clears” the Main headset.  (Skip to step 3 below)

Programming Remote Headsets

  1. Press power button on “MAIN” to turn on headset, (LED flashes green).
  2. Quickly press volume down 3 times, then press and HOLD volume up button.  LED will flash green/red.  The main is now in “program mode”.
  3. Power on “Remote” headset(s) to be programmed, (LED flashes green).
  4. Quickly press volume down 3 times, then press and HOLD volume up button.  LED will flash green/red, then quickly flash green.

         The LED will then go to solid RED.  The headset is now programmed. 

         *Repeat this step for all headsets to be programmed.

  5. Once all remote headsets have been programmed, press the power switch to turn off all headsets and complete the programming process.

    **PROGRAM ALL “LISTEN-ONLY” HEADSETS LAST